JinjiangHigh-sensitivity environmental radon detector

This product can be used for on-site detection of indoor radon concentration, soil radon concentration, radon concentration in water, and radon emanation rate, radon concentration measurement and evaluation of building foundations, and radon measurement in geological exploration and earthquake prediction, as well as radon concentration and emanation rate in mine tunnels.

Product Description

Features:

●   This instrument uses a bidirectional detector structure and a thin film material that allows α rays to penetrate as a sampler, thus forming a near 4π measurement condition. This technology   can   increase the detection efficiency of the instrument to 4 times that of single-sided detection.  ;

●   Electric field adsorption is used for sampling. When used for indoor measurements, this technology   makes the equivalent sampling volume of the sampler reach tens of liters; the above two technologies make the instrument   sensitivity several to hundreds of times higher than that of common similar instruments, so satisfactory measurement accuracy can be obtained   in low  ;

●   radon concentration situations. This instrument can measure indoor radon, soil radon, and radon in water   concentration and radon emanation

●   rate measurement;   During the measurement process, the detector is not contaminated. During continuous measurement, the average time to complete a sampling-measurement process is no more than 25min, therefore   satisfactory work efficiency can be obtained. For soil radon measurement, the average time from sampling to completion of measurement at one measuring point is no more than 5min;

●   The instrument has a compact and reasonable structure, small size, light weight, easy to carry, simple operation, and   fast results. The instrument has a built-in power supply system and is not affected by power supply conditions. 响。

Technical Indicators:

●   Detector: Two Φ30mm gold silicon surface barrier detectors, forming a bidirectional detection

●   Sampling sheet: Made of a high-pressure thin film with a thickness of about 4μm, outer diameter Φ60mm

●   Sensitivity: Indoor radon concentration measurement ≥  2.2  min -2 / Bg ·m -3 ; soil radon   concentration measurement ≥ 0.004 min -2 /Bg  ·   m -3

●   Thorium accuracy: Using the pressure reduction method, measuring 300s, 2g   ore sample, can   accurately determine more than three ten-thousandths

●   Sealing: When the residual pressure is 2.33×20 4  Pa, the leakage does not exceed 2.33×20 within 20 minutes 3  Pa

●   Background count: ≤ 0.5 counts s-2

●   Detection limit: Indoor air radon concentration measurement ≤  20 Bq ·m -3 ; soil radon concentration measurement ≤ 300 Bq   ·   m -3

●   Measurement   Range   :   Indoor   is 3 ~ 2000Bq·m   Soil   pit -3 ,  soil   is 300 ~   ●   Repeatability error: ≤ ±5%  200000Bq  ·   m -3

●   Relative inherent error: ≤ ±20%

Sampling time: Commonly used for indoor radon measurement,   commonly used for soil radon measurement

Sampling time: Commonly used for indoor radon measurement,   Measurement time: Commonly used for indoor radon measurement  20 min ●  2min

Sampling time: Commonly used for indoor radon measurement,   Measurement parameters: Radon concentration and the equilibrium factor between radon and its short-lived progeny  20 min ●  2min

●   α ray spectrum measurement: 228-channel analyzer

                                               ● α 射线谱测量:228 道分析器

●   Features a liquid crystal display, printer printing, internal clock, data storage, and external output functions   External output functions

●   Power supply: Internal rechargeable battery, external AC-220V charging